This is the first born STAB's products line. The production of this department has remained virtually unchanged in recent years confirming the validity of the products. This line has a series electronic equipment composed primarily of power suppliers, stabilizers and power inverters; complete the list of products the battery chargers, voltage reducers and rectifiers.
The "Quadro" series power suppliers are suitable to supply PLC, I/0, sensors and all the equipment that needs a stabilized tension inside the panel. These power suppliers are projected to supply an input voltage of 230Vac or 110Vac, an output voltage of 5-12-24 Vdc and a tension of 5-6-4 A.
The "Consumer" series, cheap and built in ABS containers, output 13,8 Vdc max tension 4A with double isolation and short circuit and overflow protection, is suitable for supply utilities like car stereo, linear amplifiers, receiver-transmitter equipment or radiophones, etc.
The "Metal" series is stored into metallic container and the max current reach 7A.
The "Professional" fixed voltage series divides into two categories with a voltage of 13,8 and 24 Vdc with a current of 30A and 12A.
The "Professional" adjustable voltage series is suitable for electronic workshops, plates repair in the IT sector, teaching and servicing.
The IQ power inverters series are able to transform continuous voltage (12 or 24Vdc) in alternate square wave voltage of 220Vac or 220Vac ± 5% for those stabilized. Particularly suitable for supplying transformers, incandescent bulbs, neon bulbs, cash registers, computers, printers, faxes and all the equipment with Switch or Resistive load.
The SA electronic voltage stabilizers are essentials for the protection and correctly supply of all equipment affected by interference and variations in main voltage, especially systems such as, computers, medical electrical equipment, numerical controls and cash registers. They are of solid state type with zero -crossing switching of the 7 triacs and high speed response (10ms). Thanks to their VDR and LC, RC input and output filters the eight modelsin the "SA" series provide the user with a clean voltage free from interference and spikes normally found in the main supply. The SR series are designed to correct main voltages using relays.
AD voltage reducers have been designed to power appliances normally operating at 12Vdc when the power supply is 24Vdc. Widely used on trucks to power car radios, radiophones and receiver/transmitter equipment in general.
CN for NiCd accumulators can charge from 1 to 12 elements witha constant current charge system in an automatic or manual mode. They are completely hermetic, reduced dimensions,
recharge at high current, recovery after long storage. The CN200 model is different in the batteries discharge system which is electronic at a programmed current and visualized on a 3 digit display. The CP/BP battery chargers for Pb accumulators can automatically recharge all 6V or 12 V hermetic batteries with capacities from 1,2 Ah to 25 Ah in 10-12 hours and batteries up to 40Ah in
20 hours. When the recharge process is completed, an electronic device automatically allows for disconnection of the charger.
The TR industrial voltage rectifier transformers are suitable for applications needing high current, in continuos service, up to 40 A with peaks up to 80 A Since they have no complex electronics (only rectifier bridge and capacitors) they are free from faults and electrical disturbances of the mains.
|
