Home page > La Videosorveglianza
La Videosorveglianza



EASY CONTROL SOLUTIONS

EASY CONTROL SOLUTIONS represents a new product line for CCTV systems developed and realized by STAB in order to solve the problems experienced by our customers during installations.

EASY CONTROL SOLUTIONS is completely dedicated to transmission and video distribution.

These new products will allow to solve typical problems connected to CCTV systems installation like laying down the coaxial cable, the electric system location and wiring near the camera.


TRADITIONAL SYSTEM

The following diagram is representing a CCTV system completely realized by coaxial cable RG59: the direct but bulky tracing of the cables involves long time and high installation's expenses which often discourage and therefore block the realization of CCTV systems.


Scarcely flexible cable
To install all traditional systems, connections with RG59 coaxial cable are needed. The use of this very rigid cable not much resistant to tensile stress involves some trouble in laying down cables.
Need for specific tools
In order to wire RG59 cable into the BNC connector you need to use special pliers as well as to have a technical training.


"EASY CONTROL SOLUTIONS" BENEFITS

With the system represented in the following diagram, STAB intend to push the use of the twisted pair cable CAT5/6 which is now familiar and used in most designs of new buildings. This diagram shows how to use a single twisted pair cable CAT 5/6 to distribute the video signal of 4 cameras: the result is the advantage of using a really flexible and resistant cable in order to obtain a safer and more protected tracing against the usual electromagnetic disturbances.


High flexilbility of the cable
The "Easy Control Solutions" products are designed for the use of CAT5 cable. CAT5 cable is very flexible and therefore easy to lay down in angular positions. It is also very resistant to tensile stress and therefore easy to lay inside corrugated tubes.
No tools required
No specific tools required for cabling. You can perform installation by means of the provided screwdriver and electrician scissors simply. All items for CAT5 cable have their own WAGO "CLAGE CLAMP" terminal easy to wire.

By means of the following products and of a CAT 5/6 cable only, it is possible to distribute the video signal of 4 cameras at a distance of 1500m for colour cameras and 2500m for B/W cameras. No more problems to find the mains voltage and supplying cameras as well. In fact this handbook includes a further section dedicated to installations for distances up to 220m where a single CAT 5/6 cable is used to distribute the video signal, the power supply and RS485 data.

Products

©2010 STAB S.R.L. - Via Seminiato, 79 - 44034 Ambrogio (FE) ITALY - Tel.: +39 0532 830739 - Fax: +39 0532 830609 - www.stab-italia.it - info@stab-italia.it
Capitale sociale €15.600 i.v. - Reg. Imprese di Ferrara e P.IVA n. 01460440389 - REA n.169661